5.18 U0 Group Parameter Monitoring

✅: Indicates that the parameter’s set value can be changed whether the inverter is in a stopped or running state; ✳️: Indicates that the parameter’s set value cannot be changed when the inverter is in a running state; ❎: Indicates that the parameter’s value is an actual detected record value and cannot be changed;

U0 Group: Parameter Monitoring

Function Code	Name	Setting Range	Factory Value	Attribute	DEC Address
U0-00	Running Frequency (Hz)	–	0.01Hz	❎	28672
U0-01	Set Frequency (Hz)	–	0.01Hz	❎	28673
U0-02	Bus Voltage (V)	–	0.1V	❎	28674
U0-03	Output Voltage (V)	–	1V	❎	28675
U0-04	Output Current (A)	–	0.01A	❎	28676
U0-05	Output Power (Kw)	–	0.1Kw	❎	28677
U0-06	Output Torque (%)	–	0.1%	❎	28678
U0-07	X Input Status	–	1	❎	28679
U0-08	Y Output Status	–	1	❎	28680
U0-09	AI1 Voltage (V)	–	0.01V	❎	28681
U0-10	AI2 Voltage (V)	–	0.01V	❎	28682
U0-11	AI3 Panel Potentiometer Voltage (V)	–	0.01V	❎	28683
U0-12	Counter Value	–	1	❎	28684
U0-13	Length Value	–	1	❎	28685
U0-14	Load Speed Display	–	1	❎	28686
U0-15	PID Set (Dimensionless) PID Set Pressure Value (Water Supply Activation)	–	1 0.01kg	❎	28687
U0-16	PID Feedback (Dimensionless) PID Feedback Set Pressure Value (Water Supply Activation)	–	1 0.01kg	❎	28688
U0-17	PLC Phase	–	1	❎	28689
U0-18	HDI Input Pulse Frequency (Hz)	–	0.01kHz	❎	28690
U0-19	Feedback Speed (Unit 0.1Hz)	–	0.1Hz	❎	28691
U0-20	Remaining Operating Time	–	0.1Min	❎	28692
U0-21	AI1 Pre-Calibration Voltage	–	0.001V	❎	28693
U0-22	AI2 Pre-Calibration Voltage	–	0.001V	❎	28694
U0-23	Panel Potentiometer Pre-Calibration Voltage	–	0.001V	❎	28695
U0-24	Line Speed	–	1m/Min	❎	28695
U0-25	Current Power-On Time	–	1Min	❎	28697
U0-26	Current Operating Time	–	0.1Min	❎	28698
U0-27	HDI Input Pulse Frequency	–	1Hz	❎	28699
U0-28	Communication Set Value	–	0.01%	❎	28700
U0-30	Main Frequency X Display	–	0.01Hz	❎	28702
U0-31	Auxiliary Frequency Y Display	–	0.01Hz	❎	28703
U0-32	View Any Memory Address Value	–	1	❎	28704
U0-35	Target Torque (%)	–	0.1%	❎	28707
U0-36	Current Working Auxiliary Pump Number	–	1	❎	28708
U0-37	Power Factor Angle	–	0.1°	❎	28709
U0-39	Reserved	–	1V	❎	28710
U0-40	Reserved	–	1V	❎	28711
U0-41	X Input Status Intuitive Display	–	1	❎	28712
U0-42	Y Input Status Intuitive Display	–	1	❎	28713
U0-43	X Function Status Intuitive Display 1	–	1	❎	28714
U0-44	X Function Status Intuitive Display 2	–	1	❎	28715
U0-45	Fault Information	–	1	❎	28716
U0-59	Set Frequency (%)	–	0.01%	❎	28717
U0-60	Running Frequency (%)	–	0.01%	❎	28731
U0-61	Inverter Status	–	1	❎	28733
U0-62	Current Fault Code	–	1	❎	28734
U0-65	Torque Limit	–	0.1%	❎	28737

Explore these documents for more information: